| |
| Find
your Wells Dental replacement parts right here. |
| LABORATORY
HANDPIECE |
 |
| H108 |
THUMBSCREW |
| H102 |
COLLET |
| H104 |
NOSE
CONE |
| H106 |
NOSE
CONE CONTRA ANGLE |
| H110 |
RUBBER
WRENCH |
| H206 |
COLLET
& THUMBSCREW |
| H208 |
NOSE
CONE WITH RUBBER WRENCH |
| W011 |
WRIST
JOINT |
| W204 |
SPRING
CLIP KIT |
| W102 |
RETAINING
SCREW (2 PK) |
|
| FOOT
CONTROL PARTS |
 |
| F109 |
FUSE
5A/250V (2 PCS) |
| F113 |
PLUG
RETAINER KIT |
| F200 |
CIRCUIT
BOARD KIT |
| F202 |
CONNECTOR
6-PRONG MALE |
| F206 |
RETURN
SPRING KIT |
| F208 |
SEMICONDUCTOR
KIT |
| F506 |
MALE
CONNECTOR |
| |
|
| |
|
| |
|
|
| MOTORS,
BRUSHES & REPAIR PARTS |
 |
| E132 |
MOTOR
115V |
| E133 |
MOTOR
230V |
| E101 |
BRUSHES
FOR BALDOR E132 MOTOR (2 PCS) |
| E105 |
BRUSHES
FOR BODINE E131 LARGE (2 PCS) |
| E106 |
BRUSHES
FOR WSM MOTOR (2 PCS) |
| E107 |
BRUSHES
FOR BODINE E129, E130 SMALL (2) |
| E150 |
MOTOR
PULLEY WITH SCREW |
| E504 |
CONNECTOR
6-PRONG FEMALE |
| E112 |
POWER
CORD KIT |
| E110 |
5-WIRE
CORD KIT |
| |
|
|
| SUPER
QUICK CHUCK PARTS AND TOOLS |
|
| Q188 |
STOPS,
SET OF 6 |
| Q174 |
STOP
LOCK SCREWS (PK OF 2) |
| Q559 |
TEST
ROD 1/4" |
| Q240 |
SPECIAL
COLLET COMPLETE |
| Q148 |
SPECIAL
COLLET WITH SPRING |
| Q186 |
POP-OUT
SPRING (PK OF 2) |
| Q149 |
SPECIAL
COLLET |
| Q146 |
MASTER
COLLET |
| Q542 |
SHIPPING
ROD 3/32" |
| 511 |
SCREW
SET 10-32" X 1/4" |
| 536 |
SCREW
SET 10-32" X 3/16" |
| Q521 |
NUMBER
CAP RH |
| Q555 |
NUMBER
CAP LH |
| Q184 |
CLUTCH
SPRING RH |
| Q183 |
CLUTCH
SPRING LH |
| Q250 |
HANDLE
WITH SET SCREW |
| Q605 |
DUST
COVER RH |
| Q606 |
DUST
COVER LH |
| 151 |
HEX
WRENCH 3/32" |
| Q194 |
TUBE
BRUSH 3/8" |
| Q193 |
COLLET
WRENCH 4 JAW |
| Q192 |
COLLET
WRENCH 3 JAW |
| Q243 |
CLUTCH
WELLS THREADED COMPLETE
- FOR QUICK CHUCK ON WELLS R057 LATHE |
| Q246 |
CLUTCH
BALDOR/RED WING COMPLETE
- FOR QUCK CHUCK ON BALDOR OR RED WING |
| Q150 |
CLUTCH
LINING WITH SCREWS
- FOR ALL WELLS SUPER QUICK CHUCKS |
|
| SUPER
QUICK CHUCK ACCESSORIES - FOR RIGHT HAND |
 |
| Q203 |
ACCESSORY
KIT RH |
| Q154 |
MANDREL
WITH 1-64 SCREW RH |
| Q142 |
STONE
CHUCK TOOTH AND KNIFE RH |
| Q188 |
STOPS
(SET OF 6) |
| Q194 |
TUBE
BRUSH |
| Q193 |
COLLET
WRENCH 4 JAW |
| 151 |
HEX
WRENCH 3/32" |
| Q169 |
INSTALLATION
SCREWS (PK OF 4) |
|
| SUPER
QUICK CHUCK ACCESSORIES - FOR LEFT HAND |
 |
| Q200 |
ACCESSORY
KIT LH |
| Q140 |
STONE
CHUCK TOOTH AND KNIFE LH |
| Q152 |
MANDREL
WITH 1-64 SCREW LH |
| Q124 |
ARBOR
BAND CHUCK 3/4 LH |
| Q132 |
SPIRAL
CHUCK LH |
| Q169 |
INSTALLATION
SCREWS (PKG OF 4) |
| 151 |
HEX
WRENCH 3/32" |
| Q193 |
COLLECT
WRENCH 4 JAW |
| Q194 |
TUBE
BRUSH 3/8" |
| Q188 |
STOPS
(SET OF 6) |
|
| SUPER
QUICK CHUCK ADAPTERS |
 |
| Q206 |
ADAPTER
RED WING
- FITS ALL RED WING LATHES |
| Q212 |
ADAPTER
BALDOR 210/211/221/240
- FITS BALDOR 210 AND 211 LATHES WITH 35mm OR 40mm
BEARING.
- FITS BALDOR 221 AND 240 LATHES WITH 35mm OR 40mm
BEARING.
- Q508 ADAPTOR RING 40mm IS INCLUDED FOR LATHES
WITH 40mm BEARINGS.
NOTE: FITS LATHES WITH REMOVABLE CHUCK EJECTOR ASSEMBLY
(see figure A) |
| Q218 |
ADAPTER
BALDOR 300 SERIES
- FITS BALDOR 350, 353, 357, 359, 370, 380, AND
350T & 353T IF IT HAS THE END PLATE ILLUSTRATED
IN FIGURE A WITH A REMOVABLE CHUCK EJECTOR ASSEMBLY. |
| Q223 |
ADAPTER
ROBBINS AND MYERS
- FITS ROBBINS AND MYERS LATHE |
| Q226 |
ADAPTER
RITTER A
- FITS RITTER MODEL A |
| Q229 |
ADAPTER
RITTER C
- FITS RITTER MODEL C |
| Q237 |
ADAPTER
BALDOR END PLATE
- FITS BALDOR 357T, 359T, 380T, WELLS R051, R052,
R053, AND BALDOR 350T & 353T IF IT HAS THE END
PLATE ILLUSTRATED IN FIGURE B WHERE THE CHUCK EJECTOR
SCREWS DIRECTLY INTO THE END PLATE. |
| Q239 |
ADAPTER
BALDOR 340 END PLATE
- FITS BALDOR 340 ONLY |
  |
|
|
|
|
TOP
OF PAGE - HOME
- CONTACT US - REPAIR
PARTS - FORMS - LINKS
- FAQ - SITEMAP
CATALOG - SPECIALS
- PROMOS - NEW
PRODUCTS - DLS PRODUCTS -
USED - TEETH
Having
a problem with frames on this website? Use
Non-Frames Version (under construction)
DLS
CORPORATION - Dental Lab Supplies, Equipment, Repair and Manufacturing
Website
Design and Creation by The
Website Designers | Copyright © 1998-2006 DLS CORPORATION
|
|
